Tips for use of MLB light bulbs:

When some of the screw-in light bulbs do not work this is often because they are not screwed in all the way. Sometimes a light bulb will not screw in perfectly straight and therefore not make contact with the bottom of the socket. When this happens unscrew the bulb 1-2 turns and screw the bulb back in. To better grip the bulb use a damp napkin or paper towel between the thumb and index finger. This will allow you to grip the bulb much more tightly and turn the lamp firmly into or out of the socket. Another suggestion is to try switching bulbs with another socket.

Tips for use of plug in AC Adapters:

Verify that you are using the right adapter. The larger adapter for Neon Pictures (see label) should not be used with any other kind of picture. The plug on this adapter has a slightly larger internal diameter and does not make a solid connection when plugged into any picture that does not have neon.

If the picture is not getting power, check to make sure the adapter is plugged into a wall socket that is a working 110v electrical outlet - and also that the adapter is firmly plugged in to the jack on the back of the picture. If the adapter has a built in Dimmer control, make sure the slide switch is not in the OFF position or one of the low power positions. Make sure the push button switch located on the bottom of the frame is pushed in (ON position).